Ignition Coils

Ignition Coils:

The following are the 2 different manufacturers for the ignition coils.
^ Melco (1), square design
^ Delphi (2), round design

These 2 coils use 2 different spark plug wire lengths, and mounting brackets.

Each ignition coil has an ignition 1 feed and a ground. The PCM supplies a low reference and an ignition control (IC) circuit. Each ignition coil contains a solid state driver module as the primary element. The PCM signals the coil driver to initiate a firing event by applying the IC circuit voltage for the appropriate time, or dwell. When the voltage is removed the coil fires the spark plug. The coils are current limited to prevent overloading if the IC current is held high too long.