Operation CHARM: Car repair manuals for everyone.

System Specifications

Fastener Tightening Specifications
Camshaft Position (CMP) Sensor Bolt 25 N.m
Crankshaft Position (CKP) Sensor Bolt 25 N.m
Engine Coolant Temperature (ECT) Sensor 20 N.m
Fuel Feed Pipe Fitting 30 N.m
Fuel Fill Hose Clamps 2.5 N.m
Fuel Fill Pipe Ground Strap Bolt 8 N.m
Fuel Filter Fitting 30 N.m
Fuel Pipe Front Clip Bolts 4.5 N.m
Fuel Pipe Rear Clip Bolt 5.5 N.m
Fuel Pipe Shield Nuts and Bolts 5 N.m
Fuel Rail Attaching Bolts 10 N.m
Fuel Tank Fill Pipe Bolt 2.5 N.m
Fuel Tank Fill Pipe Support Bracket Bolt 10 N.m
Fuel Tank Strap Bolts 45 N.m
Heated Oxygen Sensor (HO2S) 41 N.m
Idle Air Control (IAC) Valve Attaching Screws 3 N.m
Ignition Coil Mounting Bolt 12 N.m
Knock Sensor (KS) 20 N.m
Powertrain Control Module (PCM) Connector End Bolts 8 N.m
Powertrain Control Module (PCM) Mounting Bracket Assembly Fastener 7 N.m
PCV Hose Assembly Mounting Cable Nut 12 N.m
Secondary Air Injection (AIR) Check Valves 23 N.m
Secondary Air Injection (AIR) Pipe to Exhaust Manifold Bolts 20 N.m
Secondary Air Injection (AIR) Pump to Bracket 9 N.m
Secondary Air Injection (AIR) Shut Off Valve Bracket Bolt 20 N.m
Secondary Air Injection (AIR) Shut Off Valve Retaining Nut 12 N.m
Spark Plug New Cylinder Head 20 N.m
Spark Plug Old Cylinder Head 15 N.m
Throttle Body Attaching Bolts 12 N.m
Throttle Position (TP) Sensor Attaching Screws 2 N.m
Transmission Fluid Indicator Tube Bolt 50 N.m