Clutch Assembly Replacement

Clutch Assembly Replacement (5.7L Engine)
^ Tools Required
- J 38836 Bushing Installer and Clutch Arbor

Removal Procedure





1. Remove the manual transmission.
2. Remove the clutch pressure plate bolts (4).
3. Remove the clutch pressure plate (3) and driven disc (2) from the dowel pins on the flywheel (1).

Installation Procedure





Important: When the clutch driven plate requires replacement, the engine flywheel must also be replaced along with the clutch pressure plate as an assembly.

1. Install the clutch pressure plate and driven plate to the dowel pins on the flywheel.
2. Install the clutch pressure plate bolts finger tight.
3. Install the J 38836 in order to align the clutch driven plate to the clutch pilot bearing.





Notice: Refer to Fastener Notice in Service Precautions.

4. Tighten the clutch pressure plate bolts.
^ Tighten the clutch pressure plate bolts (in sequence shown) to 70 Nm (52 ft. lbs.).
5. Install the manual transmission.