Reverse Speed Gear Installation

Reverse Speed Gear Installation




1. Install the following parts in order:
1.1. The blocking ring
1.2. The wave washer
1.3. The wave washer so the concave side faces the blocking ring
1.4. The caged needle bearing
1.5. The reverse speed gear
1.6. The thrust washer
1.7. The retainer ring





2. Install the following parts in order:
2.1. The spacer
2.2. The roller bearing
2.3. The spacer
2.4. The roller bearing retainer ring




3. Install the retainer ring.

4. Install the speed sensor reluctor wheel using J 5590.

5. Install the retainer ring.