C1255

DTC C1255 or C1256





Circuit Description
This DTC identifies a malfunction within the EBCM.

Conditions for Running the DTC
The ABS conditions and the braking conditions are normal.

Conditions for Setting the DTC
An internal EBCM malfunction exists.

Action Taken When the DTC Sets
C1255
If equipped, the following actions occur:
^ The EBCM disables the ABS for the duration of the ignition cycle.
^ The DRP does not function optimally.
^ The ABS indicator turns ON.
^ For some DTC C1255xx, the EBCM disables the TCS for the duration of the ignition cycle and the Traction Off indicator turns ON.
^ For some occurrences of DTC C1255xx, the EBCM disables the variable effort steering (YES) for the duration of the ignition cycle.
^ For some occurrences of DTC C1255xx, the EBCM temporarily disables the TIM function for the duration of the ignition cycle.
^ For some occurrences of DTC C1255xx, the EBCM disables the DRP for the duration of the ignition cycle.
^ When the EBCM disables the DRP, the red Brake warning indicator turns ON.

C1256
^ The ABS remains functional.
^ The ABS indicator remains OFF.

Conditions for Clearing the DTC
^ The condition for the DTC is no longer present and you used the scan tool Clear DTC function.
^ The EBCM automatically clears the history DTC when a current DTC is not detected in 100 consecutive drive cycles.

Diagnostic Aids
The scan tool displays 2 additional characters after the DTC. Take note of the 2 character code and any other DTCs that are set. The 2 character code is an engineering aid used in order to determine the cause of the internal malfunction.

Test Description
The number below refers to the step number on the diagnostic table.
2. Determines whether the DTC is current.