Antenna Extension Cable Replacement

REMOVAL PROCEDURE




1. Remove the radio.
2. Remove the Instrument Panel (IP) storage compartment.
3. Remove the radio antenna cable retainers (2) from the IP (1).




4. Remove the right front carpet retainer.
5. Pull back the carpet in order to gain access to the antenna extension cable (2).
6. Disconnect the antenna extension cable (2) from the main body harness (1).
7. Remove the radio antenna cable (2) from the vehicle.

INSTALLATION PROCEDURE




1. Install the radio antenna cable (2) to the vehicle.
2. Connect the radio antenna cable (2) to the main body harness (1).




3. Reposition the carpet to a desired appearance.
4. Install the right front carpet retainer.
5. Install the antenna extension cable rosebud retainers (2) to the IP (1).
6. Install the IP storage compartment.