Tape/CD Player Error Messages

The radio displays an error when any of the following occurs.
^ The radio will display error codes for the tape player and integral CD player.
^ The radio will display the following tape player error codes for tight tape, broken tape, and wrapped tape. If these conditions are detected, the radio will switch to the radio mode and eject the tape. The error code will be displayed for 5 seconds, followed by the tuner display, then the default.
- E10-Tight tape
- E11-Broken tape
- E14-Wrapped tape
^ The radio will display the following integral CD player error codes. If one of these problems is detected, the unit will switch to the radio mode and eject the CD. The display will show TOD, if the unit is off, or display the radio frequency for 5 seconds, then the default, if the unit is on.
- E20-Optics focus error, maybe due to moisture
- E21-Optics loss of tracking control, maybe due to blemishes on disc
- E22-Load/Unload motor problem
- E23-Communication problem