Rear Door Limiter: Service and Repair

Door Check Link Replacement - Rear

Removal Procedure

1. Remove rear door trim panel.
2. Remove the rear door water deflector.




3. Remove the check link bolt from the center pillar.




4. Remove the rear door check link grommet (3).
5. Remove the check link nuts (2).
6. Remove the check link from the door.

Installation Procedure




1. Position the check link in the rear door.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the rear door check link nuts (2).

Tighten the door check link to door nuts to 10 N.m (89 lb in).

3. Install the rear door check link grommet.




4. Install the front door check link to the hinge pillar bolt.

Tighten the door check link to pillar bolt to 9 N.m (80 lb in).

5. Install the rear door water deflector.
6. Install the rear door trim panel.