Armrest Pull Cup Replacement

REMOVAL PROCEDURE




1. Remove the finish plug from the front door trim panel.
Drivers side shown, passenger side similar.
2. Remove the screws (3) from the lower pull cup (2).
3. Pull downward on the lower pull cup (2) to remove from the door trim panel.

INSTALLATION PROCEDURE




1. Install the lower pull cup (2) to the door trim panel.
Drivers side shown, passenger side similar. Press the lower pull cup (2) into the door trim panel until retaining clips are engaged.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the screws (3) to the lower pull cup (2).

Tighten
Tighten the screws to 10 N.m (89 lb in).

3. Install the finish plug to the door trim panel. Press the finish plug into place until fully seated.