Sunshade Replacement

Sunshade Replacement

Removal Procedure




1. Remove the sunshade from the sunshade anchor.
2. Remove the bezel screws.
3. Disconnect the electrical connector, if equipped.
4. Remove the sunshade.

Installation Procedure




1. Position the sunshade.
2. Connect the electrical connector, if equipped.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the bezel screws.

Tighten the sunshade bezel screws to 2 N.m (18 lb in).

4. Place the sunshade in the anchor.