Trim Panel Replacement - Rear Quarter Upper (Coupe)

Trim Panel Replacement - Rear Quarter Upper (Coupe)

Removal Procedure




1. Remove the guide cover from the front seat shoulder belt.
2. Remove the guide bolt from the front seat shoulder belt.
3. Remove the coat hook.
4. Pull out the door weatherstrip as required.




5. Carefully remove the upper quarter trim panel from the retaining clips.
6. Route the seat belt through the T slot in the upper quarter trim.

Installation Procedure

1. Route the seat belt through the T slot in the upper quarter trim.




2. Position the upper quarter trim panel and align the retaining clips.
3. Press on the panel to ensure that the clips are engaged.
4. Install the coat hook.






Notice: Refer to Fastener Notice in Service Precautions.

5. Install the guide bolt to the front seat shoulder belt.

Tighten the bolt to 42 N.m (31 lb ft).

6. Install the guide cover to the front seat shoulder belt.
7. Install the door weatherstrips.