Sunroof / Moonroof: Adjustments

1. Open the sunshade (3).
2. Close the sunroof glass panel.
3. Loosen the glass panel screws.
4. Adjust the corners of the glass panel (3) using the following guidelines:
^ Adjust the front of the sunroof glass panel (2) flush to 1 mm (0.04 in) below the top surface of the roof panel.
^ Adjust the rear of the sunroof glass panel (1) flush to 1 mm (0.04 in) above the top surface of the roof panel.

NOTE: Refer to Fastener Notice in Service Precautions.

5. Install the sunroof glass panel screws.

Tighten
Tighten the sunroof glass panel screws to 4 N.m (35 lb in).