Seat Replacement - Front Bucket

Seat Replacement - Front Bucket

Removal Procedure




1. Position the front bucket seats completely forward.
2. Remove the rear bolts from the seat adjuster.
3. Disconnect the electrical connectors to the power seat, if equipped, and to the seat belt.
4. Tilt the front bucket seats to a full recline position.
5. Disengage the track hooks from the floor pan retainers.
6. Remove the front bucket seats from the vehicle.

Installation Procedure




1. Position the front bucket seats to the vehicle.
2. Tilt the seats to the full recline position and engage the tracks to the retainers in the floor pan.
3. Connect the electrical connectors to the power seat, if equipped, to and seat belt.

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the rear bolts to the seat adjuster.

Tighten the bolts to 40 N.m (30 lb ft).

5. Inspect the seats for proper operation.
6. Position the front bucket seats to the original position.