Radiator Cooling Fan: Service and Repair
The content of this article reflects the changes identified in TSB- 05-06-02-013 Dated: December 13, 2005Cooling Fan Replacement
Caution: To help avoid personal injury or damage to the vehicle, a bent, cracked, or damaged fan blade or housing should always be replaced.
Removal Procedure
1. Remove the fan shroud. Refer to Fan Shroud Replacement.
2. Remove the fan nuts (9) from the fans (1, 8).
3. Remove the fans (1,8) from the fan motors (7, 3).
Installation Procedure
1. Install the fan to the fans (1, 8) to the fan motors (7, 3) .
2. Install the fan nuts (9) to the fans (1, 8).
Tighten the nut to 6 N.m (53 lb in).
3. Install the cooling fan shroud. Refer to Fan Shroud Replacement.