57. Engine Front Cover and Oil Pump Installation

Engine Front Cover and Oil Pump Installation





1. Install the engine front cover with a new gasket.
2. Install the long water pump bolt.
Tighten the water pump bolt to 25 Nm (18 ft. lbs.).

Notice: Refer to Fastener Notice in Service Precautions.





3. Install the engine front cover bolts.
Tighten the engine front cover bolts to 25 Nm (18 ft. lbs.).





4. Install the accessory drive belt tensioner.
Tighten the accessory drive belt tensioner bolt to 45 Nm (33 ft. lbs.).