65. Engine Flywheel Installation

Engine Flywheel Installation

^ Tools Required
- J 36660-A Torque Angle Meter
- J 38122-A Crankshaft Balancer Holder





1. Install the flywheel.
2. Install the new bolts.

Notice: Refer to Fastener Notice in Service Precautions.

3. Holding the crankshaft damper with the J 38122-A, tighten the bolts evenly.
Using the J 36660-A, tighten the bolts to 53 Nm (39 ft. lbs.), plus 25 degrees.