Heater Door Replacement

REMOVAL PROCEDURE




1. Remove the HVAC module assembly.
2. Remove the heater core.
3. Remove the heater door linkage from the heater door.




4. Remove the heater case cover shroud.
5. Remove the heater door from the HVAC module case.
6. Inspect the defroster door for damage.

INSTALLATION PROCEDURE




1. Install the heater door to the HVAC module case.
2. Install the heater case cover shroud.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the heater door case cover screws.

Tighten
Tighten the screws to 1 N.m (9 lb in).




4. Install the heater door linkage to the heater door.
5. Install the heater core.
6. Install the HVAC module assembly.