Mode Door Replacement
REMOVAL PROCEDURE1. Remove the HVAC module assembly.
2. Remove the mode actuator linkage from the mode door.
3. Remove the mode door spring.
4. Remove the screw for the mode door case cover retainer.
5. Remove the retainer.
6. Remove the mode door case cover screws.
7. Remove the mode door case cover.
8. Remove the mode door (2) from the HVAC module case.
9. Inspect the mode door for damage.
INSTALLATION PROCEDURE
1. Install the mode door (2) to the HVAC module case.
2. Install the mode door case cover.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the mode door case cover screws.
Tighten
Tighten the cover screws to 1 N.m (9 lb in).
4. Install the mode door case cover retainer.
5. Install the screw for the mode door case cover retainer.
Tighten
Tighten the screws to 1 N.m (9 lb in).
6. Install the mode door spring.
7. Install the mode actuator linkage to the mode door.
8. Install the HVAC module assembly.