Compressor Clutch Coil Removal (V5 - Direct Mount)

TOOLS REQUIRED
^ J 41790 Compressor Holding Fixture
^ J 8433 Compressor Pulley Puller
^ J 8433-3 Forcing Screw
^ J 33025 Clutch Coil Puller Legs
^ J 33023-A Puller Pilot




1. Install the compressor onto the J 41790.




2. Install the J 33023-A onto the front head of the compressor.
3. Remove the compressor clutch plate and hub assembly.
4. Remove the compressor rotor and bearing assembly.




5. Mark the clutch coil terminal location (2) on the compressor front head.
6. Install the J 33025 onto the J 8433.
7. Install the J 8433 onto the compressor clutch coil (1) and tighten the puller leg bolts.
8. Tighten the center forcing screw J 8433-3 of the compressor pulley puller J 8433 against the puller pilot to remove the compressor clutch coil from the compressor.