Instrument Panel Cluster (IPC) - Trim Plate Bezel Replacement

Trim Plate Bezel Replacement - IP Cluster (Pontiac)

Removal Procedure




1. Remove the upper trim cover from the steering column.
2. Remove the lower screws from the instrument panel (I/P) cluster trim plate.




3. Remove the upper screws (1) from the I/P cluster trim plate.
4. Remove the I/P cluster trim plate.

Installation Procedure




1. Position the trim plate tabs to the retainers on the I/P cluster.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the upper screws (1) to the I/P cluster trim plate.

Tighten the screws to 2 N.m (18 lb in).




3. Install the lower screws to the I/P cluster trim plate.

Tighten the screws to 2 N.m (18 lb in).

4. Install the upper trim cover to the steering column.