Instrument Panel Cluster (IPC) - Replacement

REMOVAL PROCEDURE




1. Remove the Instrument Panel (IP) cluster trim plate.
2. For the Pontiac only, remove the 2 IP cluster screws.




3. For the Oldsmobile only, remove the 4 IP cluster screws.
4. Pull the IP cluster rearward. Disconnect the cluster lead.
5. Remove the IP cluster.

INSTALLATION PROCEDURE




1. Connect the cluster lead to the IP cluster.
2. Position the cluster into the cluster pocket.

NOTE: Refer to Fastener Notice in Service Precautions.

3. For the Oldsmobile only, install the 4 IP cluster screws.

Tighten
Tighten the screws to 2 N.m (18 lb in).




4. For the Pontiac only, install the 2 IP cluster screws.

Tighten
Tighten the screws to 2 N.m (18 lb in).

5. Install the IP cluster trim plate.