Instrument Panel Cluster (IPC) - Trim Plate Bezel Replacement

REMOVAL PROCEDURE




1. Remove the upper trim cover from the steering column.
2. Remove the lower screws from the instrument panel (I/P) cluster trim plate.




3. Remove the upper screws (1) from the I/P cluster trim plate.
4. Remove the I/P cluster trim plate.

INSTALLATION PROCEDURE




1. Position the trim plate tabs to the retainers on the I/P cluster.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the upper screws (1) to the I/P cluster trim plate.

Tighten
Tighten the screws to 2 N.m (18 lb in).




3. Install the lower screws to the I/P cluster trim plate.

Tighten
Tighten the screws to 2 N.m (18 lb in).

4. Install the upper trim cover to the steering column.