Backup Lamp Replacement

REMOVAL PROCEDURE




1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the bulb/socket from the backup lamp by rotating counterclockwise.




3. Remove the bulb from the socket, if required.




4. Remove the nuts from the backup lamp.




5. Remove the backup lamp from the rear bumper fascia.

INSTALLATION PROCEDURE




1. Install the backup lamp to the rear bumper fascia.

NOTE: Refer to Fastener Notice in Service Precautions.




2. Install the backup lamp nuts to the backup lamp.

Tighten
Tighten the backup lamp nuts to 2 N.m (18 lb in).




3. Install the bulb to the socket, if required.




4. Install the bulb/socket to the backup lamp.
5. Rotate the bulb/socket clockwise to secure it to the backup lamp.
6. Lower the vehicle.