Instrument Panel Module Replacement

REMOVAL PROCEDURE

CAUTION: Refer to SIR Inflator Module Handling And Storage Caution in Service Precautions.




1. Disable the SIR system. Refer to Air Bag(s) Arming and Disarming.
2. Remove the instrument panel (I/P) compartment.
3. Remove the Connector Position Assurance (CPA) from the inflatable restraint I/P module yellow 2-way connector (2).
4. Disconnect the inflatable restraint I/P module yellow 2-way connector (2).
5. Remove the inflatable restraint I/P module screws (3).
6. Remove the inflatable restraint I/P module (1).

INSTALLATION PROCEDURE




1. Install the inflatable restraint instrument panel (I/P) module (1).

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the screws (3) that secure the inflatable restraint I/P module.

Tighten
Tighten the screws to 10 N.m (89 lb in).

3. Connect the inflatable restraint I/P module yellow 2-way connector (2).
4. Install the CPA to the inflatable restraint I/P module yellow 2-way connector (2).
5. Install the I/P compartment.
6. Enable the SIR system. Refer to Air Bag(s) Arming and Disarming.