Pedal Stays On Floor (Clutch Disengaged)

Pedal Stays on Floor (Clutch Disengaged)





Diagnostic Aids
Inspect the clutch pedal for a loose or worn clutch pedal spring. If the clutch pedal stays to the floor you should check the master cylinder for improper fluid level or faulty parts. Also inspect the hydraulic hoses or pipes for damage or even leaks. Inspect the clutch diaphragm springs to see if they are broken.

Test Description
The numbers below refer to the step numbers on the diagnostic table.
1. This step explains there parts and the operation of the clutch system.
4. This step inspects for the correct fluid level in the reservoir.
5. This step inspects the hydraulic lines for kinks, dents or other damage.
8. This step inspects for a faulty release bearing.
10. This step inspects for a worn or damage