Washer Solvent Container Level Sensor Replacement

REMOVAL PROCEDURE




1. Remove the left front fender liner.
2. Disconnect the washer solvent container level sensor electrical connector.

IMPORTANT: The washer solvent will drain from the washer solvent container when the washer solvent container level sensor is removed. Place a suitable drain pan under the container before removing the washer solvent container level sensor.




3. Using a small flat-bladed tool remove the washer solvent container level sensor from the washer solvent container.
4. Remove the seal from the washer solvent container.

INSTALLATION PROCEDURE




1. Position the seal to the washer solvent container pressing in until fully seated.
2. Position the washer solvent container level sensor to the washer solvent container pressing in until fully seated.




3. Connect the washer solvent container level sensor electrical connector.
4. Install the left front fender liner.
5. Fill the washer solvent container with washer solvent.