Trunk / Liftgate Latch: Service and Repair

Latch Replacement - Rear Compartment Lid

Verify the following conditions at the rear compartment lid lock striker:

* The proper lid lock operation
* The lock-to-striker engagement
* The rear compartment lid closing effort

Removal Procedure

1. Remove the rear compartment lid lock cable assembly latch.
2. Disconnect the electrical connector, if equipped.




3. Remove the bolts.
4. Remove the rear compartment lid lock assembly.

Installation Procedure




1. Install the rear compartment lid lock assembly.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the rear compartment lid lock bolts.

Tighten the rear compartment lid lock bolts to 11 N.m (97 lb in).

3. Connect the electrical connector, if equipped.
4. Install the rear compartment lid lock cable assembly latch.