Interior Lighting Module: Service and Repair
MODULE REPLACEMENT - PANEL DIMMINGREMOVAL PROCEDURE
1. Remove the left closeout/insulator panel.
2. Remove the I/P dimmer module bolts (3).
3. Remove the I/P dimmer module (2) from the HVAC bracket.
4. Disconnect the electrical connector (1) from the I/P dimmer module (2).
INSTALLATION PROCEDURE
1. Connect the electrical connector (1) to the I/P dimmer module (2).
2. Install the I/P dimmer module (2) to the HVAC bracket.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the I/P dimmer module bolts (3).
Tighten
Tighten the bolts to 4 N.m (36 lb in).
4. Install the left closeout/insulator panel.