Fog Lamp Replacement - Front

REMOVAL PROCEDURE




1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the front fog lamp nuts from the fog lamp.




3. Remove the tog lamp from the front bumper fascia.




4. Disconnect the electrical connector from the fog lamp bulb/socket.




5. Remove the fog lamp bulb/socket from the fog lamp, turning counterclockwise, if required.

INSTALLATION PROCEDURE




1. Install the fog lamp bulb/socket to the fog lamp, turning clockwise, if required.




2. Connect the electrical connector to the fog lamp bulb/socket




3. Install the fog lamp to the front bumper fascia.

NOTE: Refer to Fastener Notice in Service Precautions.




4. Install the front fog lamp nuts to the fog lamp.

Tighten
Tighten the front fog lamp nuts to 10 N.m (89 lb in).

5. Lower the vehicle.
6. Check and adjust the front fog lamp aim as necessary. Refer to Fog Lamp Aiming Procedure.