Floor Shift

Automatic Transmission Shift Lock Actuator Replacement (Floor Shift)
Removal Procedure





1. Disconnect the negative battery cable.
2. Remove the center console.
3. Disconnect electrical connector from the Automatic Transmission Shift Lock Control Actuator.





4. Remove both ends of the Automatic Transmission Shift Lock Control Actuator from pivot points (1).

Installation Procedure





1. Install the Automatic Transmission Shift Lock Control Actuator upper clip onto upper pivot point, and lower clip onto the lower pivot point.
2. Install the Center Console.
3. Install electrical connector to the Automatic Transmission Shift Lock Control Actuator.
4. Connect negative battery cable.