Finding A Station

AM-FM: Press the AM-FM button to switch between AM, FM1 and FM2. The display shows the selection.

TUNE: Turn the right side knob to choose radio stations.

SEEK: Press the up or down arrow to go to the next higher or lower station and stay there. The sound will mute while seeking.

SCAN: Press 1 of the SEEK arrows for 2 seconds, and SCAN will appear on the display. Use SCAN to listen to stations for a few seconds. The radio will go to a station, stop for a few seconds, then go on to the next station. Press 1 of the SEEK arrows again to stop scanning. The sound will mute while scanning.

PUSHBUTTONS: The 6 numbered pushbuttons let you return to the customer's favorite stations. You can set up to 18 stations (6 AM, 6 FM1 and 6 FM2). Perform the following steps:
1. Turn the radio on.
2. Press the AM-FM button to select the band.
3. Tune in the desired station.
4. Press and hold one of the six numbered buttons. The sound will mute. When it returns, release the button. Whenever you press that numbered button, the station you set will return.
5. Repeat the steps for each pushbutton.