Trim Panel Replacement - Front Seat

Trim Panel Replacement - Front Seat

Removal Procedure





1. Use a flat-bladed tool in order to carefully release the retainer from the base of the recliner handle.
2. Remove the recliner handle.
3. Remove the screws from the front seat trim panel.
4. Pull the front seat trim panel away from the seat cushion frame in order to release the clips.
Discard the clips.
5. Disconnect the electrical connectors, if equipped.
6. Remove the front seat trim panel from the front seat.



Installation Procedure





1. Install the front seat trim panel to the front seat.
2. Connect the electrical connectors, if equipped.
3. Install the front seat trim panel to the front seat cushion frame, using new clips.

Notice: Refer to Fastener Notice in Cautions and Notices.

4. Install the screws to the front seat trim panel.

Tighten the front seat trim panel screws to 3 N.m (27 lb in).

5. Install the retainer to the base of the recliner handle.
6. Install the recliner handle.