Camshaft Bearing

Camshaft Bearing Caps
Refer to the Procedure Service and Repair
Camshaft Bearing ID No. 140.00-40.040 mm (1.5748-1.5764 inch)
Camshaft Bearing ID No. 2-535.00-35.040 mm (1.3780-1.3795 inch)
End Play Clearance 0.025-0.225 mm (0.0009-0.0088 inch)
Exhaust Lobe Lift 8.8 mm (0.346 inch)
Intake Lobe Lift 9.0 mm (0.354 inch)
Journal Clearance 0.050-0.110 mm (0.0019-0.0043 inch)
Journal Diameter No. 1 39.93-39.95 mm (1.5720-1.5728 in)
Journal Diameter No. 2-5 34.93-34.95 mm (1.3751-1.3760 inch)
Lobe Taper 0.046-0.083 mm (0.0018-0.0033 inch)
Camshaft Housing
Bottom Maximum Within 100.0 mm (3.937 inch) 0.025 mm (0.001 inch)
Cam Carrier Flatness 0.07 mm (0.0028 inch)
Lifter Bore ID 32.989-33.019 mm (1.298-1.299 inch)
Lifter OD 32.961-32.973 mm (1.297-1.298 inch)
Lifter to Bore Clearance 0.016-0.058 mm (0.0006-0.0023 inch)
Lip Seal Bore ID 49.975-50.025 mm (1.9675-1.9695 inch)
Lip Seal OD 49.975-50.025 mm (1.9675-1.9695 inch)