Balance Shaft

Balance Shaft Cover Nut and Bolt 13 Nm (115 inch lbs.)
Balance Shaft to Housing Bolts 8 mm hex
First Pass 10 Nm (89 inch lbs.)
Final Pass 40°
Balance Shaft Housing Bolts 10 mm hex
First Pass 15 Nm (11 ft. lbs.)
Final Pass 40°
Balance Shaft to Block Bolts 13 mm hex
First Pass 25 Nm (18 ft. lbs.)
Final Pass 70°
Balance Shaft to Block Bolts 15 mm hex 53 Nm (39 ft. lbs.)
Balance Shaft to Block Bolts 18 mm hex
First Pass 40 Nm (30 ft. lbs.)
Final Pass 60°
Balance Shaft Chain Guide Wear Maximum Groove Depth 2.5 mm (0.100 inch)
Bearing Clearance 0.044-0.111 mm (0.0017-0.0044 inch)
Bearing ID 30.019-30.061 mm (1.1819-1.1835 inch)
Bearing Thickness 1.500-1.508 mm (0.0590-0.0593 inch)
Bore Roundness 0.025 mm (0.0009 inch)
Chain Slack, with 3 lb. of Pressure Applied to the Guide 1.0 mm (0.040 inch)
Endplay 0.185-0.455 mm (0.0073-0.0179 inch)
Gear Backlash 0.074-0.147 mm (0.0029-0.0057 inch)
Gear Diameter 61.020-61.070 mm (2.4023-2.4043 inch)
Housing Bore 33.025-33.050 mm (1.3001-1.1801 inch)
Housing Flatness Maximum 0.076 mm (0.0030 inch)
Journal Roundness Maximum 0.005 mm (0.0002 inch)
Journal Taper (Intentional Towards Counterweight) 0.012 mm (0.00047 inch)
Shaft Groove Width 3.23-3.40 mm (0.127-0.134 inch)
Shaft Journal OD 29.950-29.975 mm (1.1791-1.1801 inch)
Thrust Plate Thickness 2.945-3.045 mm (0.1159-0.1199 inch)