Crankshaft, Engine

Crankshaft Bearing Cap Bolts
First Pass 20 Nm (15 ft. lbs.)
Final Pass 90°
Crankshaft and Connecting Rod
Balancer Hub ID to Crank Snout OD 33.00-33.03 mm (1.2992-1.3004 inch)
Connecting Rod Bearing Clearance 0.010-0.068 mm (0.00039-0.0026 inch)
Connecting Rod Clearance to Piston Pin 0.007-0.032 mm (0.00028-0.0013 inch)
Connecting Rod ID at the Large End 51.167-51.193 mm (2.0144-2.0155 inch)
Connecting Rod ID at the Small End 22.007-22.027 mm (0.8664-0.8672 inch)
Connecting Rod Journal Width 23.370-23.750 mm (0.9200-0.9350 inch)
Connecting Rod Weight, in the Same Engine, All Within 2 g (0.0705 oz.)
Connecting Rod Width at the Large End 23.170-23.220 mm (0.9122-0.9142 inch)
Connecting Rod Width at the Small End 23.170-23.220 mm (0.9122-0.9142 inch)
Crankshaft Bearing Clearance 0.010-0.060 mm (0.00039-0.0023 inch)
Crankshaft End Play 0.087-0.243 mm (0.0034-0.0095 inch)
Flange Runout Maximum 0.03 mm (0.00120 inch)
Flywheel Fit 0.000-0.013 mm loose (0.0000-0.0005 inch)
ID Balancer 33.00-33.03 mm (1.2992-1.3004 inch)
ID of Seal Diameter on Crank 81.96-82.04 mm (3.2210-3.2299 inch)
Main Bearing Inside Diameter 60.019-60.060 mm (2.3629-2.3645 inch)
Main Bearing Journal Diameter 60.00-60 024 mm (2.3622-2.3631 inch)
Out of Round 0.005 mm (0.0002 inch)
Out of Round Maximum 0.005 mm (0.0002 inch)
Rod Assembly Center to Center Distance 144.95-145.05 mm (5.7067-5.7106 inch)
Rod Bearing Inside Diameter 48.001-48.043 mm (1.8898-1.8914 inch)
Rod Bearing Journal Diameter 47.975-48.00 mm (1.8887-1.8897 inch)
Rod Side Clearance 0.150-0.450 mm (0.0059-0.0177 inch)
Runout of Crankshaft at the Flywheel Flange Maximum 0.050 mm (0.002 inch)
Runout of Crankshaft Maximum 0.050 mm (0.002 inch)
Runout of Seal Surface 0.05 mm max. (0.002 inch)
Straightness, Taper 0.007 mm (0.0003 inch)
Stroke of Crank 94 mm (3.70 inch)
Supported on Front and Rear Journals Clearance to the Crankshaft 0.77-1.77 mm (0.0303-0.0697 inch)
Timing Gear Fit to Crankshaft Snout 33.03-33.06 mm (1.3004-1.3016 inch)
Width, Main Thrust Bearing Journal No. 3, Including Fillets 27.837-27.913 mm (1.0959-1.0989 inch)