Steering Column Jacket - Assemble

Steering Column Jacket - Assemble - Off Vehicle

Important: Replace the bearing and housing assembly and the pivot pins if the bearing and housing assembly has been staked 3 times.





1. Install the bearing and housing assembly.





2. Lubricate the pivot pins with lithium grease.
3. Install the 2 pivot pins.
4. Stake the pivot pins in 3 locations.
5. Install the lower shaft components.
6. Install the tilt spring only.
7. Install the Ignition switch assembly only.
8. Install the lock housing assembly.
9. Install the windshield wiper and washer switch.
10. Install the multifunction switch.
11. Install the lock cylinder.
12. Enable the inflatable restraint steering wheel module.