Power Accessory Port Replacement - Front Floor Console

TOOLS REQUIRED
J 42059 Cigarette Lighter Socket Remover

REMOVAL PROCEDURE




1. Remove the power accessory port fuse.
2. Remove the power accessory port access cover.
3. Remove the power accessory port housing by placing one side of the "T" portion of J 42059 into the tab window. Angle the other side into the opposite tab window. Pull the power accessory port housing straight out.




4. Remove J 42059 from the power accessory port housing.
5. Disconnect the electrical connector from the power accessory port housing.
6. Using your index finger pull out the power accessory port retainer.

INSTALLATION PROCEDURE




1. Install the power accessory port retainer by pressing the retainer into place until fully seated.
2. Connect the electrical connector to the power accessory port housing.




3. Align the power accessory port housing to the slots in the retainer opening.
4. Install the power accessory port housing to the retainer opening.
5. Press the power accessory port into place until fully seated in the retainer.
6. Install the power accessory port fuse.
7. Inspect the power accessory port for proper operation.
8. Install the power accessory port housing access cover.