52. Camshaft Installation

Camshaft Installation





Important: If you install a new camshaft, replace all of the valve lifters.

1. Install the camshaft.
2. Coat the camshaft lobes, journals, and oil pump drive gear with engine assembly prelude GM P/N United States 1052367, GM P/N Canada 992869, or equivalent.
3. Handle the camshaft carefully in order to prevent damage to the camshaft bearings.





Notice: Refer to Fastener Notice in Service Precautions.

4. Install the thrust plate bolts.
^ Tighten the thrust plate bolts to 12 Nm (106 inch lbs.).
5. Install the camshaft position sensor.
^ Tighten camshaft position sensor bolt to 10 Nm (89 inch lbs.).