Operation CHARM: Car repair manuals for everyone.

Mode Door Replacement

REMOVAL PROCEDURE




1. Remove the HVAC module assembly.
2. Remove the mode actuator linkage from the mode door.




3. Remove the mode door spring.




4. Remove the screw for the mode/defroster door case cover retainer.
5. Remove the retainer.




6. Remove the mode/defroster door case cover screws.
7. Remove the mode/defroster door case cover.




8. Remove the mode door (2) from the module case.

INSTALLATION PROCEDURE




1. Install the mode door (2) to the module case.




2. Install the mode/defroster door case cover.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the mode/defroster door case cover screws.

Tighten
Tighten the cover screws to 1 N.m (9 lb in).




4. Install the mode/defroster door case cover retainer.
5. Install the screw for the retainer.

Tighten
Tighten the retainer screws to 1 N.m (9 lb in).




6. Install the mode door spring.




7. Install the mode actuator linkage to the mode door.
8. Install the HVAC module assembly.