Headlamp Bulb: Service and Repair
HEADLAMP ASSEMBLY OR HEADLAMP BULB REPLACEMENTREMOVAL PROCEDURE
CAUTION: Refer to Halogen Bulb Caution in Service Precautions.
1. Remove the hood close out filler panel.
2. Remove the bolts (6) from the headlamp.
3. Remove the headlamp from the headlamp mounting panel.
4. Disconnect the electrical connector from the headlamp.
5. Remove the headlamp bulb/socket retainer ring from the headlamp.
6. Remove the headlamp bulb/socket from the headlamp.
7. Remove the bolts from the headlamp adjuster mechanism, if required.
8. Remove the headlamp adjuster mechanism, if required.
INSTALLATION PROCEDURE
1. Install the headlamp bulb/socket to the headlamp.
2. Install the headlamp bulb/socket retainer ring to the headlamp.
3. Install the headlamp adjuster mechanism to the headlamp housing, if necessary.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the bolts to the headlamp adjuster mechanism, if required.
Tighten
Tighten the headlamp adjuster mechanism bolts to 6 N.m (53 lb in).
5. Connect the electrical connector to the headlamp.
6. Position the headlamp to the headlamp mounting panel and lower mounting bracket.
7. Install the bolts (6) from the headlamp.
Tighten
Tighten the headlamp bolts (6) to 10 N.m (89 lb in).
8. Install the hood close out filler panel.
9. Check and adjust the headlamp aim as necessary. Refer to Headlamp Aiming.