Inlet

Radiator Hose Replacement- Inlet

^ Tools Required
- J 38185 Hose Clamp Pliers

Removal Procedure





1. Drain the cooling system.
2. Use the J 38185 in order to Reposition the radiator inlet hose clamps (1) from the radiator.
3. Remove the radiator inlet hose from the radiator.
4. Use the J 38185 in order to Reposition the radiator inlet hose clamps (1) from the engine.
5. Remove the radiator inlet hose from the engine.

Installation Procedure





Notice: Make sure the reference marks on the hoses and the radiator are lined up. A twist on the hose would place strain on the radiator fitting which could cause the fitting to crack or break.

1. Install the radiator inlet hose (1) to the engine.
2. Use the J 38185 in order to Reposition the radiator inlet hose clamp to the engine.
3. Install the radiator inlet hose (1) to the radiator.
4. Use the J 38185 in order to Reposition the radiator inlet hose clamp to the radiator.
5. Fill the cooling system.