Garnish Molding Replacement - Windshield Pillar

REMOVAL PROCEDURE




1. On the sedan:
^ Pull out on the top of the center pillar trim to disengage the retaining clips.
^ Pull down on the windshield garnish molding (2) to disengage the retaining clips (1).
^ Slide the garnish molding (2) out from under the center pillar trim.
2. On the coupe, start at the root and pull the windshield upper garnish molding (3) down to disengage the retaining clips (1).
3. Pull the windshield upper garnish molding (3) upward in order to disengage the molding from the carpet retainer.
4. Remove the windshield garnish molding (3) from the vehicle.

INSTALLATION PROCEDURE




1. Position the windshield garnish molding (2, 3) in the vehicle.
2. Insert the windshield upper garnish molding (2, 3) into the carpet retainer and align the retaining clips (1).
3. On the sedan, slide the windshield garnish molding (2) under the center pillar trim.
4. Push the windshield upper garnish molding (2, 3) in order to engage the retaining clips (1).
5. Press in to install the center pillar trim retainers.