Exterior Moulding / Trim: Service and Repair

FILLER PANEL REPLACEMENT - TAIL LAMP

REMOVAL PROCEDURE
1. Open the rear compartment
2. Pull back the rear compartment trim panel.
3. Remove the nut from the filler panel in the rear compartment.
4. Remove the rear bumper fascia.
5. Remove the nuts from the filler panel.
6. Remove the filler panel from the rear body panel.

INSTALLATION PROCEDURE
1. Install the filler panel to the rear body panel.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the filler panel nuts.

Tighten
Tighten the filler panel nuts to 6 N.m (53 lb in).

3. Install the rear bumper fascia.
4. Install the nut to the filler panel in the rear compartment.
5. Push back the rear compartment trim panel into place.
6. Close the rear compartment.