Heater Hose Replacement - Inlet
TOOLS REQUIREDJ 38185 Hose Clamp Pliers
REMOVAL PROCEDURE
1. Drain the engine coolant. Refer to Draining and Filling Cooling System (2.2L (L61)) in Cooling System.
2. Use the J 38185 in order to reposition the heater hose clamps.
3. Disconnect the inlet heater hose (1) from the inlet port of the engine.
4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
5. Use the J 38185 to disconnect the inlet heater hose from the heater core.
INSTALLATION PROCEDURE
1. Connect the inlet heater hose (2) to the inlet port of the heater core.
2. Lower the vehicle.
3. Connect the inlet heater hose to the inlet port of the engine.
4. Use the J 38185 in order to reposition the heater hose clamps.
5. Fill the engine coolant. Refer to Draining and Filling Cooling System (2.2L (L61)) in Cooling System.