Operation CHARM: Car repair manuals for everyone.

Horn: Service and Repair

REMOVAL PROCEDURE




1. Remove the right front fender liner.
2. Disconnect the horn electrical connector (2).
3. Remove the horn bracket bolt (3).
4. Remove the horn (1) from the front frame rail.

INSTALLATION PROCEDURE




1. Position the horn (1) into the slot in the front frame rail.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the horn bracket bolt (3).

Tighten
Tighten the bolt (3) to 10 N.m (89 lb in).

3. Connect the horn electrical connector (2).
4. Install the right front fender liner.