Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2002 >> Sunfire L4-2.2L VIN F >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Wiper and Washer Systems >> Wiper Control Module >> Service and Repair

Wiper Control Module: Service and Repair

WIPER DRIVE SYSTEM MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the air inlet grille panel.
2. Disconnect the wiper motor electrical connector.
3. Remove the wiper drive system module screws.
4. Remove the wiper drive system module from the vehicle.

INSTALLATION PROCEDURE




1. Position the wiper drive system module to the vehicle.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the wiper drive system module screws.

Tighten
Tighten the screws to 10 N.m (89 lb in).

3. Connect the wiper motor electrical connector.
4. Install the air inlet grille panel.
5. Inspect the wipers for proper operation.
pro multis · About Operation CHARM