Tilt Head Housing - Assemble
Steering Column Tilt Head Housing Assemble - Off VehicleTools Required
^ J23653-SIR Steering Column Lock Plate Compressor
^ J42137 Cam Orientation Plate Adapter
1. Install the inner race (5).
2. Install the upper bearing inner race seat (4).
3. Install the upper bearing spring (3).
4. Lubricate the turn signal cancel cam assembly (2) with lithium grease.
5. Install the turn signal cancel cam assembly (2).
6. Install the shaft lock (1).
7. Install the new bearing retainer using J23653-SIR and J421 37.
Caution: Refer to SIR Inflator Module Coil Caution in Service Precautions.
8. Install the inflatable restraint steering wheel module coil.
9. Enable the inflatable restraint steering wheel module.