Steering Column Jacket - Disassemble

Steering Column Jacket - Disassemble Off Vehicle

Tools Required
^ J21854-01 Pivot Pin Remover

Caution: Refer to SIR Caution in Service Precautions.

1. Disable the inflatable restraint steering wheel module.
2. Remove the lock cylinder.
3. Remove the multifunction switch.
4. Remove the windshield wiper and washer switch.
5. Remove the lock housing assembly.
6. Remove the ignition switch assembly.
7. Remove the tilt spring.
8. Remove the lower shaft components.





9. Remove the 2 pivot pins using J21854-01.





10. Remove the bearing and housing assembly.