Steering Column Trim Covers

Steering Column Trim Covers Replacement - On Vehicle

Removal Procedure
1. If the vehicle has tilt lever. Remove the tilt lever.





2. Remove the retaining screws (4) from the lower column trim cover (3).
3. Remove the upper column trim cover (1) by tilting up and unsnapping from the lower column trim cover hinges (3).
4. Remove the lower column trim cover (3) from the steering column (6).

Installation Procedure





1. Install the lower column trim cover (3) to the steering column.
2. Install the upper column trim cover (1) to the steering column (6).

Notice: Refer to Fastener Notice in Service Precaution.

3. Install the retaining screws (4) to the lower steering column trim cover (3).
Tighten the screws to 4 Nm (36 inch lbs.).
4. If the vehicle has tilt lever. Install the tilt lever.