Door Window Channel Replacement

REMOVAL PROCEDURE




1. Remove the front door trim panel.
2. Remove the front door water deflector.
3. Remove the front door window.
4. Remove the front door rear view mirror.
5. Remove the sealing strip, window belt outer.
6. Remove the channel (2) lower bolt (3).
7. Remove the push-in retainer (1) at the top of the channel.
8. Remove the window run channel weather-strip from the front door window (4).

INSTALLATION PROCEDURE




1. Install the run channel weather-strip (2) to the front door window.
2. Install the push-in retainer (1) at the top of the channel.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the channel lower bolt (3).

Tighten
Tighten the upper window channel lower bolt to 6 N.m (53 lb in).

4. Install the sealing strip, window belt outer.
5. Install the front door rear view mirror.
6. Install the front door window.
7. Install the front door water deflector.
8. Install the front door trim panel.